LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Remote Handle Lever Removal/Installation

Remote Handle Lever Removal/Installation

  1. To remove the remote wire, remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION ).
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: Identifying Remote Handle Lever Components
    G04861089Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals