Diagnostic procedure

DTC B1134[ADVANCED KEYLESS SYSTEM] DIAGNOSTIC PROCEDURE

STEP	INSPECTION		ACTION
1	VERIFY NUMBER OF REGISTERED CARD KEYS Using the WDS or equivalent, perform the PID/data monitor inspection and confirm the number of registered keys. (See PID/DATA MONITOR TABLE[ADVANCED KEYLESS SYSTEM] ) Is card key registered?	Yes	Replace the keyless control module and perform the resetting procedure for the advanced keyless system when replacing the keyless control module. (See KEYLESS CONTROL MODULE REMOVAL/INSTALLATION[ADVANCED KEYLESS SYSTEM] ).
1		No	Using the WDS or equivalent, register a card key if necessary. (See CARD KEY ID CODE REGISTRATION[ADVANCED KEYLESS SYSTEM] ) Go to the next step.
2	INSPECT KEYLESS CONTROL MODULE Turn the ignition switch to the ON position. Is the DTC displayed? M-MDS: B1134	Yes	Replace the keyless control module and perform the resetting procedure for the advanced keyless system when replacing the keyless control module. (See KEYLESS CONTROL MODULE REMOVAL/INSTALLATION[ADVANCED KEYLESS SYSTEM] ).
2		No	DTC troubleshooting completed.