LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> On-Board Diagnostic (Advanced Keyless System) >> DTC B1093[Advanced Keyless System] >> Diagnostic procedure

Diagnostic procedure

DTC B1093[ADVANCED KEYLESS SYSTEM] DIAGNOSTIC PROCEDURE

STEP INSPECTION ACTION
1 INSPECT COMMUNICATION CIRCUIT FOR CONTINUITY 
  • Disconnect keyless control module connector and steering lock unit connector.
  • Is there continuity between keyless control module terminal 3H and steering lock unit terminal E?
 Yes Perform the resetting procedure for the steering lock unit. (See STEERING LOCK UNIT ID CODE REGISTRATION[ADVANCED KEYLESS SYSTEM] ).
Go to the next step
No Repair the wiring harness between the steering lock unit and keyless control module.
Go to the next step
2 INSPECT STEERING LOCK UNIT 
  • Turn the ignition switch to the ON position.
  • Is the DTC displayed?
    • M-MDS: B1093
 Yes Replace the steering lock unit and perform the resetting procedure for the steering lock unit..
(See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION ).
Go to the next step
No DTC troubleshooting completed.
3 INSPECT KEYLESS CONTROL MODULE 
  • Turn the ignition switch to the ON position.
  • Is the DTC displayed?
    • M-MDS: B1093
 Yes Replace the keyless control module and perform the resetting procedure for the advanced keyless system when replacing the keyless control module.
(See KEYLESS CONTROL MODULE REMOVAL/INSTALLATION[ADVANCED KEYLESS SYSTEM] ).
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals