LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Sport, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Interlock Cable Inspection

Interlock Cable Inspection

  1. Turn the ignition switch to the ON position. (Engine off)
  2. Remove the clip of the selector lever base plate, then remove the interlock cable from the U-groove.
  3. Remove the interlock cable from the selector lever.
    Fig 1: Identifying Interlock Cable
    G04860439Courtesy of MAZDA MOTORS CORP.
  4. Verify that the interlock cable moves freely with the brake pedal depressed.
    • If there is any malfunction, inspect the interlock cable for abnormal winding. If any abnormal winding found, correct it.
    • If the malfunction persists after correcting the interlock cable winding, replace it.
      Fig 2: Inspecting Interlock Cable For Abnormal Winding
      G04860440Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals