LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Sport, FWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Removal/Installation

Ignition Coil Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION ).
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Ignition Coil And Connector With Torque Specifications
    G04859744Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals