LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Sport, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Installation Note

DSC HU/CM Installation Note

  1. Install the rubber mount on DSC HU/CM section A to the bracket as shown in the figure.
  2. Install DSC HU/CM section B to the bracket.
  3. Install the nuts to DSC HU/CM section A and tighten them.
    Fig 1: Identifying Rubber Mount Position
    G04860261Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals