LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Sport, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/CM.
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
    Fig 1: Identifying Mark On Brake Pipe
    G04860260Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals