Customized Function Setting Procedure[Advanced Keyless System]

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (notebook PC)
  1. Select "Module programming".
- When using the PDS (pocket PC)
  1. Select "Programming".
  2. Select "Module programming".
Then, select items from the screen menu in the following order.
1. Select "Pragrammable Parameters".
2. Select "RKE".
Select the item name, and than select either "Disable/Enable".
Items
- Automatic Locks
- Answer Back Buzzer
- Card Key Battery Low Alarm
  
  Fig 1: Identifying DLC-2 Connector
  Courtesy of MAZDA MOTORS CORP.