LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Lighting System) >> License Plate Light Removal/Installation

License Plate Light Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the figure(s).
    Fig 1: Removing License Plate Light
    G01931281Courtesy of MAZDA MOTORS CORP.
    Fig 2: License Plate Light Removal Sequence
    G01931280Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals