LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Security System And Locks System) >> Front Door Lock Actuator Removal/Installation

Front Door Lock Actuator Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the front door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the front door trim. (See FRONT DOOR LOCK AND OPENER REMOVAL/INSTALLATION .)
  4. Disconnect the front door lock actuator connector.
  5. Disconnect the rods and the cables.
  6. Remove the screws, and remove the front door lock.
  7. Remove the screws, and remove the front door lock actuator from the front door lock.
    8. Fig 1: Removing/Installing Front Door Lock Actuator
    G00991301Courtesy of MAZDA MOTORS CORP.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals