LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 547 (Security System And Locks System) >> Hood Latch And Release Lever Removal/Installation >> Hood Release Lever Removal Note

Hood Release Lever Removal Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the lever.
  2. While pushing the tab in the direction of the arrow using a tape-wrapped, small flathead screwdriver, detach it from the dashboard.
    CAUTION:
    • Remove the hood release lever while taking care not to damage the hood release cable with the flathead screwdriver.
  3. Under the condition in Step  2, pull the hood release lever outward, then remove it from the dashboard.
    Fig 1: Removing Hood Release Lever
    G03703160Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals