LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> General Information >> OEM General Information >> Electrical System >> Ohmmeter

Electrical System: Ohmmeter

The ohmmeter is used to measure the resistance between two points in a circuit and to check for continuity and short circuits.

CAUTION:
  • Do not connect the ohmmeter to any circuit where voltage is applied. This will damage the ohmmeter.
Fig 1: Measuring Resistance Between Two Points In Circuit
G04306885Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals