LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Power Windows) >> Removal & Installation >> Window Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The removal and installation procedures for all window control switches are similar.
  1. Remove the front door trim panel or the rear door trim panel. Refer to FRONT DOOR TRIM PANEL  , or REAR DOOR TRIM PANEL  .
    Fig 1: Removing Window Control Switch
    G01144355Courtesy of MAZDA MOTORS CORP.
  2. Release the locking clips and remove the window control switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals