LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (On-Board Diagnostic (Engine Control System 13BMSP]) >> On-Board Diagnostic Test >> Diagnostic Monitoring Test Results Access Procedure

Diagnostic Monitoring Test Results Access Procedure

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Access to the diagnostic monitoring test results and read the test results using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector
    G03701649Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals