LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (On-Board Diagnostic (Engine Control System 13BMSP]) >> After Repair Procedure

After Repair Procedure

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the WDS or equivalent to the DLC-2.
  2. Cycle the ignition switch off, then to the ON position (Engine off).
  3. Record DTC if retrieved.
  4. Clear all diagnostic data using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector
    G03701650Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals