LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Security System And Locks System) >> Trunk Lid Open Cancel Switch Removal/Installation

Trunk Lid Open Cancel Switch Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Squeeze the tabs of the trunk lid open cancel switch and pull it forward to remove it.
  4. Disconnect the trunk lid open cancel switch connector.
  5. Remove the trunk lid open cancel switch.
  6. Install in the reverse order of removal.
    Fig 1: Removing Trunk Lid Open Cancel Switch
    G01931138Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals