LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Security System And Locks System) >> Rear Outer Handle Removal/Installation

Rear Outer Handle Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door glass.
  2. Remove the rear door unit.
  3. Remove the rear door latch.
  4. Remove the bolts.
  5. Detach the rear outer handle and rear door latch rod.
    Fig 1: Removing Rear Outer Handle Bolt
    G01931112Courtesy of MAZDA MOTORS CORP.
  6. With the rear side of the rear outer handle fixed and the outer handle lever pulled out (1), remove the rear side of the rear outer handle from the rear door.
  7. Pull out the front side of the rear outer handle from the rear door.
  8. Install in the reverse order of removal.
    Fig 2: Removing Rear Side Of Rear Outer Handle From Rear Door
    G01931113Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals