Possible Causes

CAUTION:

Use the Flex Probe Kit for all test connections to prevent damage to the wiring terminals. Do not use standard multimeter probes.

PINPOINT TEST 2 CHART - DTC B1359 - IGNITION RUN/ACC CIRCUIT FAILURE OR NO POWER IN ACC

PINPOINT TEST 2		DTC B1359 - IGNITION RUN/ACC CIRCUIT FAILURE OR NO POWER IN ACC
STEP	INSPECTION		ACTION
1	CHECK THE WIPERS AND THE RADIO FOR NORMAL OPERATION WITH THE IGNITION SWITCH IN THE RUN POSITION Key ON. With ignition switch in the run position, check the wipers and the radio for normal operation. Do the wipers and the radio operate correctly in the RUN position?	Yes	Install a new ignition switch. See IGNITION SWITCH . Test the system for normal operation.
1		No	See PINPOINT TEST 3: DTC B1555 - IGNITION RUN CIRCUIT FAILURE OR NO POWER IN RUN .