LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis (Single Page) >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> 2008-09: MAZDA5 >> Mode 02 (EGR System Repair Verification Drive Mode)

Mode 02 (EGR System Repair Verification Drive Mode)

  1. Verify all accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
  2. Drive the vehicle as shown in the graph.
  3. Stop the vehicle and access ON BOARD SYSTEM READINESS menu of GENERIC OBD-II FUNCTION to verify the OBD monitoring status.
    • If completed, the OBD monitoring status items change from non-completed to completed.
    • If not completed, turn the ignition switch off then repeat from Step 3.
  4. Access DIAGNOSTIC MONITORING TEST RESULTS menu of GENERIC OBD-II FUNCTIONS to verify the monitor results.
    • If detected values are not within specification, repair has not been completed.
  5. Verify no DTCs are available.
    Fig 1: EGR System Repair Verification Drive Mode
    G05542937Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals