LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Controls [System & Component Testing]) >> Miscellaneous Controls >> Cooling Fan >> Single Speed Motor - MPV

Single Speed Motor - MPV

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, 2003 Mazda MPV, and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure battery is fully charged. Disconnect cooling fan 2-pin harness connector from fan control module. Connect ammeter between positive battery terminal and positive terminal of fan control module 2-pin harness connector (cooling fan harness). Ground negative terminal of fan control module 2-pin harness connector (cooling fan harness). See Fig 1.
  2. Ensure cooling fan motor operates smoothly at specified standard current draw. See COOLING FAN MOTOR CURRENT DRAW SPECIFICATIONS  table. If cooling fan motor current draw is not as specified, replace cooling fan motor.
Fig 1: Testing Single Speed Cooling Fan Motor - MPV
G00193586Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals