LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Security System And Locks System) >> Trunk Lid Opener Cancel Switch Removal/Installation

Trunk Lid Opener Cancel Switch Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Squeeze the tabs of the trunk lid opener cancel switch and pull it forward to remove it.
  4. Disconnect the trunk lid opener cancel switch connector.
  5. Remove the trunk lid opener cancel switch.
  6. Install in the reverse order of removal.
    Fig 1: Removing Trunk Lid Opener Cancel Switch
    G03703184Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals