System Inspection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Purge system operation takes place when vehicle is accelerating in gear (off idle), engine is at operating temperature and HO2S is functioning normally. Ensure all vapor lines are connected and in acceptable condition. See Fig 1 or Fig 4 .

NOTE: Evaporative emission system schematic for Protege and 626 is not available from manufacturer.

Fig 1: Identifying Evaporative Emission Components (Miata)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Evaporative Emission Components (Millenia)

Courtesy of MAZDA MOTORS CORP.

Fig 3: Identifying Evaporative Emission Components (Protege & Protege5)

Courtesy of MAZDA MOTORS CORP.

Fig 4: Identifying Evaporative Emission Components (626)

Courtesy of MAZDA MOTORS CORP.