LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Power Steering System) >> Ignition Lock Cylinder Removal/Installation >> Lock Cylinder Functional

Lock Cylinder Functional

WARNING: This page is about a different car, the 2004 Mazda B4000, 2004 Mazda B3000, and 2004 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Insert the ignition key (2) and turn to the RUN position.
  3. Press the lock cylinder release pin (3) while pulling out the lock cylinder.
  4. Install in reverse order of removal.
  5. Verify lock cylinder operation.
    Fig 1: Removing & Installing Ignition Lock Cylinder
    G01936370Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals