LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - System & Component Testing) >> Emission Systems & Sub-Systems >> Fuel Evaporation (EVAP) System - MPV >> Purge Control Solenoid Valve

Purge Control Solenoid Valve

WARNING: This page is about a different car, the 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, 2001 Mazda MPV, and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect purge control solenoid valve connector, located next to air inlet. Ensure air flows through solenoid valve vacuum ports "B" and "C". Using fused jumper wires, apply battery voltage to solenoid valve terminals. Apply air pressure to a solenoid valve port "B". Air should flow from port "A". If valve does not operate as specified, replace solenoid valve.

scientia non olet · About LEMON Manuals