LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System Programming >> Smart Junction Box (SJB) >> Installation

Smart Junction Box (SJB): Installation

  1. Install the SJB.
    • Install the 3 screws.
    • Connect the electrical connectors.
  2. Install the RH lower cowl trim panel.
  3. Connect the battery. See BATTERY DISCONNECT .
  4. Download the SJB configuration information from the IDS or equivalent tester. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION , .
    NOTE:
    • When successful, this step clears the manufacturing mode DTCs.
  5. Carry out TPMS sensor training. For additional information, refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING , .
scientia non olet · About LEMON Manuals