LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B2300 Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Axle >> Axle Housing Bushing Removal / Installation >> Removal Note

Removal Note

NOTE:
  • Axle tube bushing removal shown, axle housing bushing is a similar procedure.
  1. Remove the front axle assembly; see AXLE ASSEMBLY FRONT REMOVAL / INSTALLATION  .
  2. Position the tube bushing removal or equivalent tools.
    1. Position Bushing Remover/Replacer Cup SST  (205-371) or equivalent.
    2. Position Draw-bolt SST  (205-374) or equivalent.
    3. Thread the Bushing Remover Adapter SST  (205-376) on the Draw-bolt SST  (205-374).
    Fig 1: Positioning Special Tools For Axle Housing Bushing Removal
    G04308677Courtesy of MAZDA MOTORS CORP.
  3. Tighten the Draw-bolt SST  (205-374) to remove the bushing.
Fig 2: Tightening Draw-Bolt To Removing Bushing
G04308678Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals