LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Automatic Transaxle [Shift Mechanism]) >> Selector Lever Component Inspection

Selector Lever Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the center console.
  3. Remove the dashboard completely. (See DASHBOARD REMOVAL/INSTALLATION ).
  4. Disconnect the selector lever component connector.
  5. Inspect for continuity at the selector lever component.
    • If there is any malfunction, adjust the selector cable. (See SELECTOR CABLE ADJUSTMENT ).
      Fig 1: Identifying Selector Lever Connector Terminals
      G04326461Courtesy of MAZDA MOTORS CORP.
      Fig 2: Checking Selector Lever Continuity
      G04326462Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals