LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 714 (Charging System (L3 With TC)) >> Generator Removal/Installation [L3 With TC] >> Generator Removal Note

Generator Removal Note

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cooler hose bracket bolt and set the cooler hose out of the way before performing the generator removal/installation.
  2. Remove the generator from above the engine compartment.
    Fig 1: Identifying Cooler Hose
    G04955108Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals