LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 714 (Charging System (L3 With TC)) >> Generator Disassembly/Assembly [L3 With TC] >> Pulley Disassembly/Assembly Note

Pulley Disassembly/Assembly Note

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble/assemble the pulley using the SST  .

    Tightening torque 

    60-85 N.m {6.1-8.7 kgf.m, 45-62 ft.lbf} 

    Fig 1: Disassembling Pulley Using SST
    G04955123Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals