Rear Coil Spring Installation Note
WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Position the jack under the rear lower arm and jack up slowly.WARNING:
- Installing the coil spring is dangerous. The coil spring could fly off and cause serious injure or death, and damage the vehicle.
- Align the upper end of the rear coil spring with the step of the upper spring seat rubber.
- Align the lower end of the rear coil spring with the step of the lower spring seat rubber.
- Install the lower arm outer bolt.