LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Ignition System) >> Ignition Coil Removal/Installation

Ignition Coil Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  4. Remove the front suspension tower bar (joint). (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in Fig 1 .
  6. Install in the reverse order of removal.
    Fig 1: Removal Order Of Ignition Coil With Torque Specifications
    G04318027Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals