LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Control System AJ) >> No. 18 Cooling System Concerns-Runs Cold >> Diagnostic procedure

Diagnostic procedure

DIAGNOSTIC PROCEDURE

STEP INSPECTION ACTION
1
  • Is customer complaint "Lack of passenger compartment heat" only?
Yes Inspect A/C and heater systems.
No Go to the next step.
2
  • Does engine speed continue at fast idle?
Yes Go to symptom troubleshooting "NO. 9 FAST IDLE/RUNS ON ".
No Go to the next step.
3 Yes Go to the next step.
No Replace thermostat.
(See THERMOSTAT REMOVAL/INSTALLATION ).
4
  • Inspect fan control system operation.
  • Does fan control system work properly?
Yes Access ECT PID using M-MDS.
Inspect for both ECT PID and temperature gauge on instrument cluster readings.
  • If temperature gauge on instrument cluster indicates normal range but ECT PID is not same as temperature gauge reading, inspect ECT sensor.
  • If temperature gauge on instrument cluster indicates cold range but ECT PID is normal, inspect instrument cluster and related harnesses.
No Repair or replace malfunctioning part.
5
  • Verify test results.
    • If normal, return to diagnostic index to service any additional symptoms.
    • If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
      • If vehicle is repaired, troubleshooting completed.
      • If vehicle is not repaired or additional diagnostic information is not available, reprogram PCM if later calibration is available. Retest.