LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Control System AJ) >> Engine Control System Operation Inspection >> Variable Valve Timing Control System Operation Inspection >> When idling can be continued >> For right bank

For right bank

  1. Disconnect OCV (RH) connector.
  2. Warm up the engine and it at idle.
  3. Apply the battery voltage to the OCV and verify that the engine idles roughly or stalls.
    • If the engine idles roughly or stalls, inspect the timing belt component (valve timing deviation).
    • If the engine does not idle roughly or stall, go to the next step.
  4. Remove the OCV (RH) and perform spool valve operation inspection. (See OIL CONTROL VALVE (OCV) INSPECTION ).
    • If not as specified, inspect the following:
      • OCV(RH)
      • Harnesses and connectors between OCV (RH) and PCM have an open or short circuit.
    • If as specified, inspect the following right bank hydraulic passages for clogging or leakage, or both.
      • Oil pressure switch - OCV
      • OCV-camshaft
      • Camshaft internal passage
  5. If they are normal, replace the right bank camshaft pulley (with built-in variable valve timing actuator).
scientia non olet · About LEMON Manuals