DTC P0602: Notes

DTC P0602 [AJ] DETECTION CONDITION AND POSSIBLE CAUSES

DTC P0602

PCM programming error

DETECTION CONDITION

No configuration data in PCM.

NOTE:

If the "PCM CONFIGURATION" is successful, the PCM stores DTC P0602 and illuminates the MIL (system is normal). Clear DTC P0602 using the M-MDS after the "PCM CONFIGURATION".
The MIL goes out after three drive cycles with no failure (DTCs remain in PCM).

Diagnostic support note

This is a continuous monitor (CCM).
MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
FREEZE FRAME DATA is available.
DTC is stored in PCM memory.

POSSIBLE CAUSE

Complete configuration has not been completed
PCM malfunction