Rear Cover Assembly Note
CAUTION:
- Clean away the old sealant before applying the new sealant.
- Install the rear differential within 10 minutes after applying sealant.
- Allow the sealant to set at least 30 minutes after installation before filling the differential with the specified oil.
- Clean the alignment surface of the carrier and rear cover, and apply a thin coat of sealant.
- Install the rear cover.
Tightening torque
15.7-22.6 N.m {1.6-2.3 kgf.m, 11.6-16.6 ft.lbf}