LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft >> Rear Drive Shaft Disassembly/Assembly >> Boot Assembly Note

Boot Assembly Note

NOTE:
  • The wheel side and differential side boots are different.
  1. Fill the wheel side boot with the specified grease.
    CAUTION:
    • Do not touch grease with your hand. Apply it from the tube to prevent foreign matter from entering the boot.

    Grease amount 

    75-95 g {2.65-3.35 02} 

  2. With the splines of the shaft wrapped in tape, install the boot.
  3. Remove the tape.
scientia non olet · About LEMON Manuals