LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic (Abs/TCS) >> Abs/TCS On-Board Diagnosis >> Clearing DTCs Procedures

Clearing DTCs Procedures

  1. Connect the M-MDS to the DLC-2 connector.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Toolbox" tab.
      2. Select "Self Test".
      3. Select "Modules".
      4. Select "ABS".
      Fig 1: Locating DLC-2 Connector
      G04325977Courtesy of MAZDA MOTORS CORP.
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "ABS/TCS".
      3. Select "Self Test".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals