LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System (L3 With TC)) >> Pcm Removal/Installation

Pcm Removal/Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • For PCM replacement, set up the M-MDS and perform the PCM configuration. (See PCM CONFIGURATION ).
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: Identifying PCM, PCM Cover & PCM Connector
    G04325205Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals