LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 715 (Front Axle) >> Front Wheel Hub Bolt Replacement

Front Wheel Hub Bolt Replacement

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake calliper component and disc plate.
  2. Remove the wheel hub bolt using the SST  as shown in the figure.
    NOTE:
    • When removing the wheel hub bolts, perform the work between range A shown in the figure to assure a space for the bolt removal.
  3. Place a new wheel hub bolt in the wheel hub.
    Fig 1: Removing Wheel Hub Bolt
    G04955519Courtesy of MAZDA MOTORS CORP.
  4. Install the wheel hub by placing a proper sized washer on the hub, and tightening the nut as shown in the figure.
    Fig 2: Installing Hub Bolt
    G04955520Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals