LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 691 (Washer System & Wiper System) >> Rain Sensor Initialization Setting >> Rain Sensor Reinitialization Setting

Rain Sensor Reinitialization Setting

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove water and dirt from the windshield surface.
  2. Turn the ignition switch off.
  3. Turn the windshield wiper switch to the AUTO position.
  4. Perform the windshield wiper switch operation (AUTO→OFF→AUTO) five times within 10 s after turning the ignition switch to the ON position.
    CAUTION:
    • If the operation is too fast, the windshield wiper switch position cannot be detected and the reinitialization may not be preformed. Operate the windshield wiper switch one cycle every 1 s. 
  5. Verify that the windshield wipers operate at low speed.
    • If the windshield wipers do not operate at low speed, perform the rain sensor reinitialization again.
NOTE:
  • When the reinitialization is performed correctly, the windshield wipers operate once at low speed.
scientia non olet · About LEMON Manuals