LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Antilock Brake System) >> Rear Abs Wheel-Speed Sensor Removal/Installation

Rear Abs Wheel-Speed Sensor Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the partition board. (See PARTITION BOARD REMOVAL/INSTALLATION .)
  3. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
  4. Remove the fuel-filler pipe protector. (See FUEL TANK REMOVAL/INSTALLATION [LF] .)
  5. Remove in the order indicated in Fig 1 .
  6. Install in the reverse order of removal.
    7. Fig 1: Rear ABS Wheel-Speed Sensor With Torque Specifications
    G04318428Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals