LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (AJ) >> Clutch Pedal Position (CPP) Switch Inspection >> Continuity Inspection

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the clutch switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [G35M-R, A65M-R] ).
  3. Inspect for continuity between the clutch switch terminals B and D using an ohmmeter.
    • If the clutch switch is okay, but the PID value is out of specification, perform the "Circuit Open/Short Inspection".
    • If not as specified, replace the clutch switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [G35M-R, A65M-R] ).

      Specification 

      Fig 1: Continuity Reference Chart
      G04325301Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Clutch Switch Connector Terminals
      G04325302Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals