Front Outer Handle Removal/Installation
- Remove the front door glass.
- Detach the outer handle and front door latch rod.
- For protector-equipped vehicles, refer to KEY CYLINDER REMOVAL/INSTALLATION to remove the protector.
- Remove the bolts.
Courtesy of MAZDA MOTORS CORP.
- With the rear side of the outer handle fixed and the outer handle lever pulled out (1), remove the rear side of the outer handle from the front door.
- Pull out the front side of the outer handle from the front door.
- Remove the request switch harness from the door, (with advanced keyless system)
- Install in the reverse order of removal.
Courtesy of MAZDA MOTORS CORP.