DTC B1013: Notes
DTC B1013 DETECTION CONDITION AND POSSIBLE CAUSES
| DTC B1013 |
Seat weight sensor calibration error |
| DETECTION CONDITION |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Calibration set value not within valid range.
|
| POSSIBLE CAUSE |
- Weight acting on passenger-side front seat during calibration
- Improperly installed passenger-side front seat part at time of calibration
- Deformed floor where attached to passenger-side front seat
- Deformed passenger-side front seat under-bracket or frame
- Seat weight sensor deformed or malfunction
- Seat weight sensor control module malfunction
- SAS control module malfunction
|