LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 i, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Glass/Windows/Mirrors) >> Power Outer Mirror Removal/Installation

Power Outer Mirror Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover.
  2. Disconnect the negative battery cable.(See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Remove the door trim.(See DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the door speaker.(See DOOR SPEAKER REMOVAL/INSTALLATION .)
  5. Remove the door unit.(See DOOR UNIT REMOVAL/INSTALLATION .)
  6. Remove clips.
    Fig 1: Identifying Clip
    G04931285Courtesy of MAZDA MOTORS CORP.
  7. Rotate the power outer mirror in the direction shown by the arrow.
    Fig 2: Rotating Power Outer Mirror
    G04931286Courtesy of MAZDA MOTORS CORP.
  8. Remove the bolt.
    Fig 3: Mirror Bolt With Torque Specifications
    G04931287Courtesy of MAZDA MOTORS CORP.
  9. Rotate the power outer mirror in the direction shown by the arrow.
    Fig 4: Rotating Power Outer Mirror
    G04931288Courtesy of MAZDA MOTORS CORP.
  10. Remove the bolt and the power outer mirror.
  11. Install in the reverse order of removal.
Fig 5: Power Outer Mirror And Bolt With Torque Specifications
G04931289Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals