LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 i, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Fuel System) >> After Service Precaution >> Fuel Leakage Inspection >> Using M-MDS or Equivalent

Using M-MDS or Equivalent

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS or equivalent to the DLC-2.
    Fig 1: Locating DLC-2 Connector
    G04317682Courtesy of MAZDA MOTORS CORP.
  2. Start the fuel pump using the "FP" simulation function.
  3. Verify that there is no fuel leakage from the pressurized parts.
    • If there is leakage, replace the fuel hoses and clips.
    • If there is damage on the seal on the fuel pipe side, replace the fuel pipe.

    Standard 

    There shall be no leakage after 5 min. 

  4. After reinstallation, repeat step  2- 3 in the fuel leakage inspection.