LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 i, 4D Hatchback, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Removal/Installation >> Trunk Lid

Trunk Lid

  1. Disconnect the negative battery cable.
  2. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION. )
  3. Remove the screws, then remove the request switch.
    Fig 1: Request Switch
    G04327346Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals