LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 751 (Front Suspension System) >> Front Stabilizer Removal/Installation >> Notes

Front Stabilizer Removal/Installation: Notes

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach the steering shaft from the steering gear and linkage. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
  4. Inspect the wheel alignment and adjust it if necessary. (See FRONT WHEEL ALIGNMENT .)
    Fig 1: Front Stabilizer Replacement Components With Torque Specifications
    G04955471Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals