LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Antilock Brake System) >> Abs HU/Cm Inspection >> Notes

Abs HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ABS HU/CM connector.
  2. Connect the negative battery cable.
  3. Attach the tester lead to the ABS HU/CM wiring harness-side connector, then inspect the voltage, continuity, or resistance according to the standard (reference) on the table.
scientia non olet · About LEMON Manuals