LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Interior Trim) >> Console Removal/Installation

Console Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Detach clips A, B and C and remove the upper panel.
    Fig 1: View Of Upper Panel And Clips
    G04956935Courtesy of MAZDA MOTORS CORP.
  3. Detach clips D, E and F and remove the boot panel.
    Fig 2: View Of Boot Panel And Clips
    G04956936Courtesy of MAZDA MOTORS CORP.
  4. Remove screws A.
  5. Detach clips G.
  6. Disconnect the cigarette lighter connector.
  7. Remove the ashtray illumination, then remove the ashtray panel.
    Fig 3: Disconnecting Cigarette Lighter Connector
    G04956937Courtesy of MAZDA MOTORS CORP.
  8. Remove the screws B.
  9. Detach tabs H and remove the console.
  10. Disconnect the auxiliary jack connector.
  11. Disconnect the accessory socket connector.
  12. Install in the reverse order of removal.
    Fig 4: Identifying Console Components
    G04956938Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals